81 W/m∙K by using a differential 3ω method [24]. find more Figure 4 The thermal conductivities of nonporous and nanoporous Bi thin films. (a) The thermal Temsirolimus conductivities of nanoporous Bi thin films as a function of pore diameters. (b) The average thermal conductivities of nonporous and nanoporous Bi thin films plotted against their neck size at room temperature and compared to those of a Bi NW (approximately 123 nm in diameter) at 280 K. Insets show SEM images, and table provides a summary of the geometric parameters of the Bi thin films, n is the neck size, p is the pitch size,

and d is pore size, as indicated in the inset. The scale bar is 500 nm. For further verification of the correlation between thermal conductivity and neck size, in Figure 4b, the room-temperature thermal conductivities of the three nanoporous Bi films are plotted against their neck size and compared to those of the planar Bi film in Figure 4b and summarized in inset table of Figure 4b. As shown in Figure 4b, the average thermal conductivity shows monotonically decrease by shrinking

the neck size up to approximately 65 nm (increasing porosity up to 45.04%). This reduction behavior in thermal conductivity is in mTOR activity good agreement with recent reports of holey Si thin films [13]. Tang et al. reported thermal conductivities of approximately 10.23, approximately 6.96, and approximately 2.03 W/m∙K for holey Si thin films with neck/pitch sizes of 152/350 nm, 59/140 nm, and 23/55 nm, respectively [13]. They also suggested that the thermal conductivity reduction is dominantly influenced

by the neck sizes rather than Exoribonuclease the porosity, by measuring the thermal conductivity of holey Si thin films with different neck sizes (160 to 40 nm) and porosity (13% to 40%). Similarly, Yu et al. demonstrated a very low thermal conductivity of approximately 1.9 W/m∙K at room temperature for a meshed Si structure with neck and pitch sizes of 16 and 34 nm, respectively [14]. Thus, we confirmed that the neck sizes of nanoporous Bi thin films do play the important role in reducing the thermal conductivity. To elucidate these enormous reductions in thermal conductivity of nanoporous structures, Dechaumphai et al. suggested that phonons be considered as particles in the incoherent regime when the phonon mean free path (MFP) is shorter than the characteristic size of the phononic crystals, and otherwise, phonons be treated as waves in the coherent regime [25]. According to their model, based on the partially coherent effect in phononic crystals, the competition between phonon scattering at pore boundaries in the incoherent regime and the phonon group velocity induced by zone folding effects in the coherent regime leads to an overall monotonic reduction in the total thermal conductivity as the pitch or neck size decreases as shown in Figure 4b.